- TELESCOPIC - TIPPER CYLINDERS
- STANDARD-BALL
- 2 extensions (3,5 tons)
- 2 extensions (6 tons)
- 2 extensions (9 tons)
- 2 extensions (13 tons)
- 3 extensions (5 tons)
- 3 extensions (8 tons)
- 3 extensions (11 tons)
- 3 extensions (16 tons)
- 4 extensions (7 tons)
- 4 extensions (10 tons)
- 4 extensions (14 tons)
- 4 extensions (20 tons)
- 4 extensions (25 tons)
- 5 extensions (5 tons)
- 5 extensions (8 tons)
- 5 extensions (11 tons)
- 5 extensions (16 tons)
- 5 extensions (22 tons)
- 5 extensions (29 tons)
- 6 extensions (6 tons)
- 6 extensions (9 tons)
- 6 extensions (13 tons)
- 6 extensions (20 tons)
- 6 extensions (25 tons)
- 6 extensions (32 tons)
- 6 extensions (40 tons)
- 6 extensions (50 tons)
- 7 extensions (10 tons)
- 7 extensions (11 tons)
- 7 extensions (14 tons)
- 7 extensions (22 tons)
- 7 extensions (30 tons)
- 7 extensions (38 tons)
- 7 extensions (42 tons)
- 8 extensions (11 tons)
- 8 extensions (11 tons)
- 8 extensions (18 tons)
- 8 extensions (25 tons)
- 8 extensions (30 tons)
- 8 extensions (38 tons)
- 9 extensions (20 tons)
- 9 extensions (25 tons)
- 9 extensions (30 tons)
- 10 extensions (20 tons)
- 10 extensions (28 tons)
- STANDARD-HOLE
- 2 extensions 3,5 tons
- 2 extensions 6 tons
- 2 extensions 9 tons
- 2 extensions 13 tons
- 3 extensions 5 tons
- 3 extensions 8 tons
- 3 extensions 11 tons
- 3 extensions 16 tons
- 4 extensions 7 tons
- 4 extensions 10 tons
- 4 extensions 14 tons
- 4 extensions 20 tons
- 4 extensions 25 tons
- 5 extensions 5 tons
- 5 extensions 8 tons
- 5 extensions 11 tons
- 5 extensions 16 tons
- 5 extensions 22 tons
- 6 extensions 6 tons
- 6 extensions 9 tons
- 6 extensions 13 tons
- 6 extensions 20 tons
- 7 extensions 14 tons
- 7 extensions 22 tons
- 8 extensions 11 tons
- 8 extensions 11 tons
- 8 extensions 18 tons
- INFERIOR-HOLE
- HOLE-HOLE
- BALL-BALL
- COMPACT
- ECO
- TEHNOSTROJ
- UNIMOG
- MEILLER KIPPER
- HYDRAULIC CYLINDER - LIFT
- DUMPER TRUCK
- ACCESSORIES
- TIPPER HOSES
- PLANNING
- STANDARD-BALL
- THREE POINT LINKAGES
- HYDRAULIC CYLINDERS
- HYDRAULIC PUMPS
- CAST IRON GEAR PUMPS
- CAST IRON GEAR PUMPS CASAPPA
- PISTON HIGH PRESSURE PUMPS
- BENT AXIS PISTON PUMPS
- ALUMINIUM GEAR PUMPS
- GR ''1'' flange - right
- GR ''1'' flange - left
- GR ''1'' thread - right
- GR ''1'' thread - left
- GR ''2'' flange - right
- GR ''2'' flange - left
- GR ''2'' thread - right
- GR ''2'' thread - left
- GR ''3'' flange - right
- GR ''3'' flange - left
- GR ''3'' thread - right
- GR ''3'' thread - left
- GR ''0'' - right
- HI-LO pumps
- bellhousings
- rubber couplings
- accessories for gear pumps
- flange with bearing shaft
- electro magnetic coupler
- multiplicator-pump over gear
- ASSEMBLY GEAR PUMPS
- TRACTOR PUMPS
- OTHER PUMPS
- NSZ PUMPS
- ELECTRIC PUMPS
- HAND PUMPS
- POWER TAKE-OFF
- HYDRAULIC MOTORS
- HYDRAULIC MOTORS MM
- HYDRAULIC MOTORS MM SIDE
- HYDRAULIC MOTORS MP
- HYDRAULIC MOTORS MR
- HYDRAULIC MOTORS MP (6 teeth)
- HYDRAULIC MOTORS MS
- HYDRAULIC MOTORS MT
- HYDRAULIC MOTORS MV
- HYDRAULIC MOTORS B/MR WITH BRAKE
- BRAKES FOR HYDRAULIC MOTORS
- HYDRAULIC MOTOR FOR CATERPILLAR TRACK
- HYDRAULIC MOTORS PTO SHAFT
- GEARBOXES FOR HYDRAULIC MOTORS
- VALVES FOR HYDRAULIC MOTORS
- SLEWING - WORM DRIVE
- GEAR HYDRAULIC MOTORS GR.2
- GEAR HYDRAULIC MOTORS GR.3
- HYDRAULIC VALVES
- MONOBLOCK VALVES
- SECTIONAL CONTROL VALVE
- REMOTE CABLE VALVES
- SOLENOID OPERATED CONTROL VALVE
- BALL AND DIVERTER VALVES
- INLINE-CONTROL VALVES
- FLOW REGULATION
- PRESSURE REGULATION
- SOLENOID MODULAR CETOP 3 -NG6 VALVES
- SOLENOID MODULAR CETOP5 -NG10 VALVES
- ELECTORMAGNETNIC YEAT VALVES
- COILS
- REMOTE LEVERS
- WIRELESS CONTROLLERS
- PRESSURE SWITCHES
- PROPORTIONAL VALVES
- VALVES FOR TRACTORS - ATTACHMENTS AND BRAKES
- TRACTOR TIPPING OUTPUT EXTENSION
- FOREST CRANE AND LOG SPLITTING VALVES
- FLOATING FUNCTION VALVES
- LOAD SENSING VALVES
- HYDRAULIC FILTERS
- HYDRAULIC POWER-PACKS
- MINI HYDRAULIC POWER-PACK 12 V
- MINI HYDRAULIC POWER-PACK 24 V
- MINI HYDRAULIC POWER-PACK 230 V
- MINI HYDRAULIC POWER-PACK 400 V
- TRACTOR HYDRAULIC POWER-PACK
- GASOLINE HYDRAULIC POWER-PACK
- HYDRAULIC DIESEL POWER-PACK
- HYDRAULIC ASSEMBLY WITH HYDRAULIC PUMP 400 V
- HYDRAULIC ASSEMBLY WITH HYDRAULIC PUMP 12/24 V
- ELECTRIC MOTOR FOR HYDRAULIC POWER-PACK
- PARTS FOR MINI HYDRAULIC POWER UNIT
- OIL TANKS 'TOP'
- OIL TANKS FOR HYDRAULIC POWER-PACK
- METAL OIL TANKS
- OILT TANKS FOR MINI HYDRAULIC POWER-PACK
- ACCESSORIES
- ASSEMBLED HYDRAULIC POWER-PACKS
- HYDRAULIC HOSES
- OIL HEAT EXCHANGERS
- EQUIPMENT FOR TRAILERS
- LATCH CLOSURE
- BRAKE CYLINDERS
- TOWING EYES
- TRACTOR HOOKS
- AIR BRAKES
- PROPORTIONAL HYDRAULIC BRAKES
- PARKING JACKS
- HINGES AND SUPPORTS
- HINGES AND SUPPORTS
- tipping trailer supports set fi60
- tipping trailer supports set fi78
- tipping trailer supports set fi85
- tipping trailer supports set fork
- tipper ball 8ton for trailer Dia.60
- tipper ball 14 ton for trailer Dia.80
- trailer hinge bracket AVEC
- trailer hinge
- chamfered plug ROMA
- trailer hinge removable c-shape
- hinges for the side of the trailer
- trailer welding hook
- LIGHTS FOR TRAILERS AND SOCKETS
- PULL LEVERS
- TRAILER PANELS
- AXLES AND TYRES
- ACCESSORIES
- WEDGE STOP FOR TRAILERS
- BOXES
- GRAPPLES AND ROTATORS
- PTO DRIVE SHAFTS
- PTO SHAFTS
- PTO PROFI LINE
- PTO SHAFT EXTENSIONS
- PTO SHAFT EXTENSIONS - BUSHINGS
- PTO SHAFT EXTENSIONS WITH FLANGE
- PTO SHAFT EXTENSIONS WITH PIN
- PTO SHAFT EXTENSIONS WITH HOLE
- PTO SHAFT EXTENSIONS - TWO-SIDED
- PTO SHAFT EXTENSIONS - STANDARD
- PTO SHAFT EXTENSIONS - FLANGE WITH PIN
- PTO DRIVE SHAFTS EXTENSIONS FOR CULTIVATOR
- DOUBLE UNINVERSAL JOINT FOR PTO
- PROTECTION
- PTO SHAFT EXTENSIONS - ADAPTER
- PTO SHAFT CLUTCH
- EQUIPMENT FOR CIRCULAR SAW
- CRIMPING MACHINES
- HYDRAULIC STEERING
- QUICK COUPLINGS
- QUICK COUPLER TRACTOR ''AGRI''
- QUICK COUPLER TRACTOR ''THREADED''
- QUICK COUPLER TRACTOR ''EXCAVATOR''
- QUICK COUPLER FOR BRAKES
- CARRIER FEMALE QUICK COUPLER
- MULTI FASTER COUPLER
- MARKER HOLDER FOR QUICK CUPLINGS
- PROTECTION RUBBER COVER - MALE QUICK COUPLER
- PROTECTION RUBBER COVER - FEMALE QUICK COUPLER
- PVC PROTECTION COVER - FEMALE QUICK COUPLER
- QUICK COUPLER - OTHER
- MANOMETERS
- FITTINGS
- FITINGS FOR CRIMPING
- FITTINGS BSP - FEMALE
- FITTING BSP - MALE
- FITTING BSP - FEMALE ELBOW 45°
- FITTING BSP - FEMALE ELBOW 90°
- FITTINGS DKOL - FEMALE
- FITTING CEL - MALE
- FITTING DKOL - FEMALE ELBOW 45°
- FITTING DKOL - FEMALE ELBOW 90°
- FITTING DKOS FEMALE
- FITTING CES MALE
- FITTING DKOS FEMALE ELBOW 45°
- FITTING DKOS FEMALE ELBOW 90°
- FITTING DKJ JIC74° FEMALE
- HYDRAULIC FITTING AGJ JIC74°
- HYDRAULIC FITTING DKJ JIC74° FEMALE ELBOW 45°
- HYDRAULIC FITTING JIC74° FEMALE ELBOW 90°
- HYDRAULIC FITTING DKORFS FEMALE
- HYDRALIC FITTING DKORFS FEMALE ELBOW 45°
- HYDRAULIC FITTING DKORFS FEMALE ELBOW 90°
- HYDRAULIC FITTING AGORFS MALE
- FITTING KOMATSU
- HYDRAULIC FITTING EYE
- HYDRAULIC DOUBLE THREADED FITTINGS
- HYDRAULIC DOUBLE THREADED SWIVEL NUT
- HYDRAULIC DOUBLE THREADED BSP EXTENDED
- HYDRAULIC DOUBLE SWIVEL NUT
- HYDRAULIC STUD FITTING
- HYDRAULIC DOUBLE THREADED EXTENDED AGJ JIC74°
- HYDRAULIC DOUBLE THREADED ELBOW 90° AGJ JIC74°
- HYDRAULIC THROTTLE DOUBLE THREADED ELBOW 90° AGJ J
- HYDRAULIC REDUCER FITTING BSP
- HYDRAULIC REDUCER FITTING JIC74
- HYDRAULIC STUD MALE BSP
- HYDRAULIC ADAPTERS
- ELBOW AND TEE FIITINGS
- ELBOW 90° BSP SHORT MALE-MALE
- TEE FITTING BSP MALE-MALE
- TEE FITING WITH SWIVEL NUT
- ELBOW 90° MALE-FEMALE THREAD
- TEE FITTING FEMALE-FEMALE THREAD
- TEE FITTING WITH SWIVEL NUT ON SIDE
- ELBOW 90° SHORT FEMALE-FEMALE
- ELBOW 90°BSP SWIVEL NUT-MALE
- ELBOW 90° CONE-STRAIGHT SEALING
- ELBOW 90° BSP MALE-FEMALE
- ELBOW 45° BSP MALE-FEMALE
- ELBOW 90° FEMALE-FEMALE
- ELBOW 45° BSP FEMALE-FEMALE
- ELBOW 90° FLEXIBLE MALE-MALE
- ELBOW 45° FLEXIBLE MALE-MALE
- METAL PIPES - FITTINGS
- HYDRAULIC FITTING PIPE STRAIGHT TRANSIT
- HYDRAULIC FITTING PIPE ELBOW TRANSIT 45°
- HYDRAULIC FITTING PIPE ELBOW TRANSIT 90°
- HYDRAULIC METAL PIPE
- NUT FOR METAL HOSE
- RING FOR METAL HOSE
- DOUBLE THREADED WITH RING AND NUT
- DOUBLE THREADED WITH RING AND NUT 60°
- INTERMEDIATE DOUBLE THREADED WITH NUTS
- DOUBLE THREADED ELBOW 90° WITH NUT
- DOUBLE THREADED ELBOW 90° WITH DOUBLE NUTS
- HYDRAULIC CROSS FITTING
- HYDRAULIC TEE FITTING WITH NUT
- HYDRAULIC CAPS
- HYDRAULIC HOLLOW BOLTS
- METAL HOSE BANJO
- WASHERS
- REDUCER WGE
- OTHER - UNCLASSIFIED
- O-RING RUBBER SEAL
- HYDRAULIC BREATHER CAP PTO
- THREAD PITCH GAUGE TOOL
- FITINGS FOR CRIMPING
- OTHER PRODUCTS
- PROTECTIVE EQUIPMENT
- CAR LIFTS
- HYDRAULIC BEARING PRESS
- CHAIN HOIST
- MANUAL GREASE
- HAND CARE
- FITING BOLTS
- TOY TRACTOR
- SETS
- PVC OIL TANK FOR BRAKE OIL
- TRACTOR COMPRESSOR PTO
- REVOLVING HOOKS WITH SAFETY EYE
- EYE HOOK
- FUEL CANS
- FORESTRY CHAINS
- VIBRATION DAMPERS
- GARDEN TROLLEY - TIPPER
- sand for removal of oil stains
- ROSI Teh retractable tape - 3m
- GASOLINE EARTH AUGER
- HAND WIRE BRUSH
- LEAF BLOWER
- ELECTRIC MOTORS
- 1 PHASE (230V) B3-LEGS
- 1 PHASE (230V) B14 - FLANGE - LEGS
- 1 PHASE (230V) B35 - FLANGE - LEGS
- 1 PHASE (230V) - CIRCULAR SAW
- 3 PHASE (400V) B3-LEGS
- 3 PHASE (400V) B14 - FLANGE - LEGS
- 3 PHASE (400V) B35 - FLANGE - LEGS
- 3 PHASE (400V) - CIRCULAR SAW
- ELECTRIC MOTORS WITH BRAKE
- GEAR BOXES - REDUCTORS PMRV
- GEAR BOXES - REDUCTORS ERC
- UDL VARIABLE GEARBOX FOR ELECTRIC MOTOR
- FREQUENCY CONVERTERS - INVERTER - NON VECTOR CONTR
- FREQUENCY CONVERTERS - INVERTER - VECTOR CONTROL
- PARTS FOR ELECTRIC MOTORS
- ELECTRIC MOTOR PULLEY
- V-BELTS
- CONNECTION PLUGS FOR MOTORS
MANUAL VALVE FOR HYDRAULIC MOTOR MP-MR-MH CLOSE CENTER - 50lit
Article code:
13093
OEM:
9990000087457
Tax rate
22 %
Price without VAT:
131,15 €
Price with VAT:
160,00 €
Ref:
2
Description:
The manual valve is mounted directly on the hydraulic motor and is used to operate it directly on the hydraulic motor.
The valve lever allows switching on and off as well as changing the direction of rotation of the hydraulic motor.
Valve "OPEN CENTER" - In the neutral position, the hydraulic motor is not braked. It is not hydraulically driven, but the shaft of the hydraulic motor can rotate with its own inertia or load inertia.
It is most often used in applications where we want the drive to stop with the inertia of the load or have the ability to rotate the drive itself - the hydraulic motor.
Ventil "CLOSE CENTER" - In the neutral position, the hydraulic motor is braked, which means that even the inertia of the load cannot rotate it.
It is most often used in applications where we want the drive to stop immediately and stand still after turning off the drive - the hydraulic motor.
supplier:
Spain
connector:
P and T - 1/2"
product weight:
1,1 kg
max. flow:
50 l/min
max. pressure:
210 bar
return or exchange:
14 days
warranty:
6 months
max. operating pressure:
180 bar