Description:

Electronic pressure switches 'X5' allow triggering an electronic micro switch upon reaching a predetermined pressure value and regulating hysteresis. The working point of the lowest and highest pressure is set with four buttons. The connector with a transparent two-color LED light green/red indicates the status of the alarm threshold.

OPERATION:

You can increase the pressure to the maximum possible pressure. When the green color of the LED indicator in the connector is pressed - (minus) on the MAX scale, until the color changes on the connector. When the red color of the LED indicator (already operating) press + on the MAX scale until the color changes on the connector.

To find the minimum pressure desired point at the LED indicator red color press + on the MIN scale until the color changes on the connector. The LED indicator turns green (if already reached before the desired pressure)

You can increase the pressure to the desired maximum possible pressure. At the 'green' diode press the - (minus) button on the MAX scale until the color changes on the connector. At the 'red' diode (which is already operating) press + on the MAX scale until the color changes on the connector.
Y To find the minimum value, press down to the desired minimum point. At the 'Red' diode press + on the MIN scale until the color changes on the connector. This leads to the 'green' diode - if the pressure is reached before the desired pressure or shows 'red' diode and for a few seconds press - (minus) on the MIN and repeat step Y until the color on the connector turns on the lowest desired pressure.

Minimum hysteresis 2%

Pressure on the function button is ~ 1bar / sec